Double Wall Heated Produced Water Tank

 Double Wall Heated Water

 

 

AGI has designed a heated double wall Envirotank for produced water.

A catadyne heater is used to heat the air space between the inner and outer tanks. This heat keeps the tank's contents moveable even in the severest of Canadian winters.

The Envirotank Advantage

bullet

No dikes, liners, gravel or excavation

bullet

Requires 50% less installation area as opposed to a single wall tank with a dike

bullet

Quick & easy to install and relocate

bullet

One tank relocation pays for the extra cost of the double wall tank

bullet

Meets Directive 55 and or API standards

bullet

Our Envirotanks are shipped with the heater already installed. (Not in a box for field install.)

bullet

AGI's unique corner cabinet allows our tanks to be moved without pilot cars on standard highboy trailers.

Standard Features
bullet

Directive 55 labeled or API certified

bullet

110% containment (no dike required)

bullet

Lifting and tailing lugs

bullet

Normal venting for both primary and secondary tanks

bullet

3" fill c/w check valve

bullet

3" discharge c/w valve, camlock & stinger

bullet

3/4" sight glass for containment space

bullet

8" thief hatch (sweet service)

bullet

Open style gauge board in cubic meters

bullet

Catadyne Infra-red gas heater

bullet

12 volt heater leads

bullet

Thermostatic temperature control valve

bullet

Pressure gauge and regulator

bullet

Vent hood assembly

bullet

1 1/2" urethane foam c/w black elastomeric seal

bullet

Elevated tank floor (For free heat movement in containment)

bullet

Cabinet for heater and valves

 

 

 

 

 

Optional Features
bullet

Bottom skid (Recommended on tanks 100 Barrels and smaller)

bullet

L-skid (Recommended on tanks 200 Barrels and larger)

bullet

Heater fired with Natural Gas or Propane

bullet

Sealed gauge board or electronic level gauge

bullet

Thief hatch for sour service

bullet

Epoxy lining of tank interior

bullet

Upgrade urethane foam to 2"

bullet

Upgrade urethane foam to aluminum clad insulation

bullet

High and or low level switches. (electric or pneumatic)

bullet

Ladder with cage

bullet

Custom colors

bullet

Custom capacity and dimensions

 

Dimensional Chart
Capacity Inner Tank Dia. I.D. Inner Tank Height Outer Tank Dia. O.D. Outer Tank Height Weight

50 BBL (7,950 L)

93" 72" 99" 72"

 4,500 lbs

100 BBL (15,910 L) Stock Item

132" 72" 141" 72"

 5,500 lbs

210 BBL (33,413 L) Stock Item

118" 192" 127" 192"

8,700 lbs

300 BBL ( L)

144" 177.5" 150" 180"

 13,500 lbs

400 BBL (63,364 L) Stock Item

144" 240" 153" 240"

 18,000 lbs

                            AGI     Biggar, Saskatchewan, Canada    1-800-746-6646    www.Envirotank.com